# \#stiffener

**URL:** https://sierraconnect.protoexpress.com/tag/stiffener/57.md

[Latest](https://sierraconnect.protoexpress.com/latest.md) · [Categories](https://sierraconnect.protoexpress.com/categories.md) · [Tags](https://sierraconnect.protoexpress.com/tags.md)

---

## [Defining stiffener in Flexible PCB design files](https://sierraconnect.protoexpress.com/t/defining-stiffener-in-flexible-pcb-design-files/3480)

<div class="topic-metadata">

**Author:** [@devonel](https://sierraconnect.protoexpress.com/u/devonel)\
**Replies:** 5\
**Last updated:** [August 26, 2025, 3:52pm UTC](https://sierraconnect.protoexpress.com/t/defining-stiffener-in-flexible-pcb-design-files/3480 "2025-08-26T15:52:49Z")

</div>

My flexible PCB design requires a stiffener. Since the stiffener is a separate component from the flex circuit itself, I’m unsure about the best way to define it in my PCB design files. Should I use a dedicated mechanica…

---

## [TIP: Flex PCB thickness](https://sierraconnect.protoexpress.com/t/tip-flex-pcb-thickness/223)

<div class="topic-metadata">

**Author:** [@atar.mittal](https://sierraconnect.protoexpress.com/u/atar.mittal)\
**Replies:** 0\
**Last updated:** [October 10, 2023, 1:49am UTC](https://sierraconnect.protoexpress.com/t/tip-flex-pcb-thickness/223 "2023-10-10T01:49:13Z")

</div>

TIP: Avoid unnecessary circuit thickness which hinders flexible capabilities. The thickness of the flex area is determined by the bend radius needed. If parts of the flex circuit need to be thicker, add stiffeners.
