# \#drilling

**URL:** https://sierraconnect.protoexpress.com/tag/drilling/96.md

[Latest](https://sierraconnect.protoexpress.com/latest.md) · [Categories](https://sierraconnect.protoexpress.com/categories.md) · [Tags](https://sierraconnect.protoexpress.com/tags.md)

---

## [Do Fabricators Need Drill Maps on Fab Drawings?](https://sierraconnect.protoexpress.com/t/do-fabricators-need-drill-maps-on-fab-drawings/3667)

<div class="topic-metadata">

**Author:** [@johnkl](https://sierraconnect.protoexpress.com/u/johnkl)\
**Replies:** 7\
**Last updated:** [November 10, 2025, 1:58pm UTC](https://sierraconnect.protoexpress.com/t/do-fabricators-need-drill-maps-on-fab-drawings/3667 "2025-11-10T13:58:13Z")

</div>

When creating a PCB fabrication drawing, how important is it to include a drill map. A drill table makes sense for verifying hole counts and min/max sizes, but the map itself, is it necessary and do fabricator still requ…

---

## [PCB Glossary: Backdrilling](https://sierraconnect.protoexpress.com/t/pcb-glossary-backdrilling/3682)

<div class="topic-metadata">

**Author:** [@Pooja\_Mitra](https://sierraconnect.protoexpress.com/u/Pooja_Mitra)\
**Replies:** 0\
**Last updated:** [November 7, 2025, 7:05am UTC](https://sierraconnect.protoexpress.com/t/pcb-glossary-backdrilling/3682 "2025-11-07T07:05:31Z")

</div>

Backdrilling is a technique used to remove unused via barrel segments (via stubs) after the PCB has been drilled and plated. This process involves drilling from the back side of the board to a controlled depth, eliminati…

---

## [5 important DFM checks for PCB designers](https://sierraconnect.protoexpress.com/t/5-important-dfm-checks-for-pcb-designers/3019)

<div class="topic-metadata">

**Author:** [@lucy.sierracircuits](https://sierraconnect.protoexpress.com/u/lucy.sierracircuits)\
**Replies:** 0\
**Last updated:** [March 25, 2025, 5:14pm UTC](https://sierraconnect.protoexpress.com/t/5-important-dfm-checks-for-pcb-designers/3019 "2025-03-25T17:14:27Z")

</div>

Design for manufacturing starts with your stack-up—ensure it’s properly designed before beginning the layout. Once the stack-up and component placements are set, routing follows. Even if routing rules aren’t fully def…

---

## [Ask Me Anything about PCB Via Design](https://sierraconnect.protoexpress.com/t/ask-me-anything-about-pcb-via-design/1734)

<div class="topic-metadata">

**Author:** [@lucy.sierracircuits](https://sierraconnect.protoexpress.com/u/lucy.sierracircuits)\
**Replies:** 30\
**Last updated:** [December 19, 2024, 8:03pm UTC](https://sierraconnect.protoexpress.com/t/ask-me-anything-about-pcb-via-design/1734 "2024-12-19T20:03:24Z")

</div>

Join our Ask Me Anything about via design where you can ask us questions on: • Blind, buried and microvias • Stitching vias • Via stub length and backdrilling • And much more! :speech\_balloon: Question submission wi…

---

## [This is how we laser drill](https://sierraconnect.protoexpress.com/t/this-is-how-we-laser-drill/674)

<div class="topic-metadata">

**Author:** [@steve.carney](https://sierraconnect.protoexpress.com/u/steve.carney)\
**Replies:** 0\
**Last updated:** [December 6, 2023, 4:47pm UTC](https://sierraconnect.protoexpress.com/t/this-is-how-we-laser-drill/674 "2023-12-06T16:47:17Z")

</div>

This is a test job just to show you how we set up the machine for laser drilling. At the end of the video, you can watch the drilling happening in real time through the machine camera.
