# Webinar: Resolving Common Errors in RF PCB Layout Design

**URL:** <https://sierraconnect.protoexpress.com/t/webinar-resolving-common-errors-in-rf-pcb-layout-design/3340>\
**Category:** Webinars & Events\
**Tags:** webinar, rf\
**Created:** [July 9, 2025, 9:26pm UTC](https://sierraconnect.protoexpress.com/t/webinar-resolving-common-errors-in-rf-pcb-layout-design/3340 "2025-07-09T21:26:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![lucy.sierracircuits](https://sea2.discourse-cdn.com/sierraconnect/user_avatar/sierraconnect.protoexpress.com/lucy.sierracircuits/32/8_2.png) [@lucy.sierracircuits](https://sierraconnect.protoexpress.com/u/lucy.sierracircuits)\
**Post date:** [July 9, 2025, 9:26pm UTC](https://sierraconnect.protoexpress.com/t/webinar-resolving-common-errors-in-rf-pcb-layout-design/3340/1 "2025-07-09T21:26:02Z")

</div>

Welcome to the first webinar of our RF series!

#1 Resolving common errors in RF PCB layout design  
#2 Techniques for building reliable RF PCB stack-ups  
#3 BGA fanout strategies for RF applications  
#4 Thermal management in RF circuits

## Webinar agenda:

- **Design mistakes RF engineers make:**
  - o Overlooking via design and stubs
  - o Unintended ground loops and split ground planes
  - o Impedance mismatching among various RF components

- **How to design like a pro:**
  - o Crafting vias and avoiding via stubs
  - o Best grounding practices and designing stitching vias
  - o Layout tips to ensure uniform impedance

- **Industry standards for designing radio frequency boards**

**Missed the webinar?** Click the link below to watch the recording.

> **Webinar: Resolving Common Errors in RF PCB Layout Design**
>
> **Starts:** July 23, 2025, 10:00am (America/Los\_Angeles)\
> **Ends:** July 23, 2025, 11:00am (America/Los\_Angeles)\
> **Location:** https://www.protoexpress.com/webinars/resolving-common-errors-rf-pcb-layout/?utm\_source=sierraconnect&utm\_medium=display&utm\_campaign=feed%2B2025

---

<div class="post-metadata">

**Author:** ![lucy.sierracircuits](https://sea2.discourse-cdn.com/sierraconnect/user_avatar/sierraconnect.protoexpress.com/lucy.sierracircuits/32/8_2.png) [@lucy.sierracircuits](https://sierraconnect.protoexpress.com/u/lucy.sierracircuits)\
**Post date:** [July 29, 2025, 7:03pm UTC](https://sierraconnect.protoexpress.com/t/webinar-resolving-common-errors-in-rf-pcb-layout-design/3340/2 "2025-07-29T19:03:21Z")

</div>

| Question | Answer |
| --- | --- |
| Copper roughness is always 6? How do we get this specification? | 6 microns is a typical roughness value for standard copper foil, but it is not fixed. The actual roughness depends on the type of copper foil used, such as standard, low-profile, or very low-profile foils. You can find a table listing the typical roughness values for various foil types in the help (?) section of that input field in the tool.  
 |
| What is the max frequency your online calculators work up to? | Most of our calculators are independent of frequency and can be used across a wide range of applications.  
1. Impedance calculators use lossless models, so they are not frequency-dependent. The Dk/Df values used in our impedance calculations are typically based on measurements at 10 GHz.  
2. Loss calculators can be used for high-frequency analysis and are suitable for very high-frequency ranges.  
3. Via impedance calculators are generally valid up to a few gigahertz (GHz), but their accuracy at higher frequencies has not been extensively validated. |
