# EDA tool recommendation

**URL:** <https://sierraconnect.protoexpress.com/t/eda-tool-recommendation/893>\
**Category:** Design and Layout\
**Created:** [January 18, 2024, 2:28pm UTC](https://sierraconnect.protoexpress.com/t/eda-tool-recommendation/893 "2024-01-18T14:28:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jane](https://avatars.discourse-cdn.com/v4/letter/j/ecb155/32.png) [@Jane](https://sierraconnect.protoexpress.com/u/Jane)\
**Post date:** [January 18, 2024, 2:28pm UTC](https://sierraconnect.protoexpress.com/t/eda-tool-recommendation/893/1 "2024-01-18T14:28:21Z")

</div>

Is there any specific option in Altium Designer to expedite via stitching?

---

<div class="post-metadata">

**Author:** ![dilip](https://avatars.discourse-cdn.com/v4/letter/d/47e85d/32.png) [@dilip](https://sierraconnect.protoexpress.com/u/dilip)\
**Post date:** [February 9, 2024, 11:22am UTC](https://sierraconnect.protoexpress.com/t/eda-tool-recommendation/893/2 "2024-02-09T11:22:24Z")

</div>

> [@Jane](#):
>
> expedite

Hello Jane,

Yes we can. From the menu, select Tool → Via stitching/shielding → Add Stitching to net or Add Shielding to net. From this option you can able to add stitching/shielding vias to any specific nets or overall board (with selection of vias size, net names…).